The diameter of roller for forming at bottom part: 90mm
2.4.3 welding device (mechanical component)
Manual roll remain: a single established (Be used for controlling course of weld seam)
Extruding roll stand for welding: two units (Be applied for managing weld seam to understand productive welding.)
2.4.4 Chilling device:
2.4.5 Sizing gadget:
The specification of sizing device:
Remain of curler volume Size of horizontal roll’s shaft substance
Horizontal roll remain 5 φ36mm 40Cr
Top to bottom roll stand 5 φ20mm 45#
The demand of sizing device because the ask for of creating gadget.
2.4.6 Straightening machine:
Utilization: It really is mostly employed for straightening of done pipe approximately on the internet.
2.5 Pc-handled slicing noticed:
Framework: set size personal computer-handled cutting
Method of Control: Air conditioning
The highest operating velocity from the vehicle: 80 m/min
Reducing size: φ8~φ25mm
Reducing density: -1.0mm
Slicing threshold: ~30 millimeters
Repaired size: 4~6m
The specs of the saw blade: φ350*3
Reducing engine: 3KW
(Prepare using the personal computer-handled keeping track of engine: 7.5KW)
Pneumatic program: .4~.7 Mpa
6. higher-regularity
1). product: GP100-.6-H
2). input power: 3P,380V,50Hz
3). Out set power: 100kw
4). management modeof out put energy: controlled by microprocessor
5). higher voltage rectifier: 20A
6). higher voltage transformer: 3,380V,180KVA
7). digital hose: FU-911S
8). transformer in the electronic hose shaking : 12V-AC
9).anode hydraulic pipe of digital hose : polythene strengthening tube
10).capacitor: CCG81-2000P-20KV