Strapping System For Paper-Pile

Stacked paper vertical strapping

Stacked paper vertical strapping refers to a method of bundling together stacks of paper using a vertical strap. This can be done manually or with a machine.

To manually strap paper stacks together, you will need a roll of strapping material (such as plastic or metal) and a buckle or seal to secure the strap.

To begin, place the stack of paper on a stable surface and position the strap around the center of the stack. Pull the strap tight and secure it in place using the buckle or seal. Repeat this process for any additional stacks of paper that need to be strapped.

There are also machines available that can automatically strap stacks of paper together. These machines typically use a roll of strapping material and a mechanism to secure the strap in place. The stacks of paper are placed on a conveyor belt and are automatically strapped as they move through the machine.

Vertical strapping is often used in the shipping and distribution of paper products, such as newspapers, magazines, and books. It is a cost-effective and efficient way to keep stacks of paper together and prevent them from becoming damaged during transport.


[email protected]


Machines for alumnium coil strapping

  • Fully automatic strapping machine is a specialized piece of equipment that is used to secure coils with straps. The machine is designed to handle the vertical strapping of coils and can be equipped with different heads for different joint types and strap qualities. The machine is also capable of applying coil protectors and marking or labeling the coils as they pass through the strapping process. It is available in a single-head version for the application of one strap or a twin-head version for the simultaneous application of two straps. The machine utilizes a conveyor system to load and center the coils, and the strap is fed through a strap channel before being sealed by the head. Is there anything else I can help with?
  • The fully automatic strapping machine is capable of applying multiple straps to a single coil by moving the strapping frame with the head to preset positions. This allows the machine to apply multiple straps to a single coil in a precise and efficient manner. If the machine is equipped with a twin-head version, it can apply two straps simultaneously, which can further increase the efficiency of the strapping process. It’s worth noting that the specific details of the strapping process may vary depending on the specific model and configuration of the machine, as well as the type and size of the coils being strapped. Is there anything else you’d like to know about this type of machine?
  • Contact:
  • [email protected]

Strapping Machine for bricks & blocks

Different Strapping Machines for bricks & blocks applications.

There are mainly 2 different strappin methods for bricks and clocks stacking pallets from FHOPE packing team.

  • 1. Vertical strapping of stacked bricks and blocks

Vertical strapping is a method of reinforcing stacked bricks or blocks by using metal straps or bands that are applied vertically to the sides of the stack. The straps provide additional support and stability to the stack, helping to prevent it from collapsing or shifting.

To apply vertical strapping, the straps are typically placed around the sides of the stack at regular intervals, with the top and bottom straps being positioned close to the top and bottom of the stack. The straps are then tightened using a tensioning tool, such as a ratchet or torque wrench, to apply a uniform tension to the straps.

Vertical strapping is often used in the construction of retaining walls, chimneys, and other structures that require additional stability and support. It can be especially useful in situations where the bricks or blocks are stacked to a significant height, or where the stack is subjected to high loads or other external forces.

  • 2. Horizontal strapping of stacked bricks and blocks

Horizontal strapping of stacked bricks and blocks refers to the practice of securing a stack of bricks or blocks together with horizontal straps or bands. This is typically done to ensure that the bricks or blocks stay in place and do not shift or collapse. There are a few different ways to perform horizontal strapping:

Using metal straps: Metal straps are typically made of steel and can be bent to fit around the stack of bricks or blocks. They are then tightened using bolts or screws.

Using wire ties: Wire ties can be used to secure a stack of bricks or blocks together. These ties are made of wire and are tightened using a wire-tying tool.

Using adhesive: Some builders use adhesive to secure a stack of bricks or blocks together. This is typically done by applying a thin layer of adhesive between the bricks or blocks and then allowing it to dry.

Regardless of the method used, the goal of horizontal strapping is to provide additional stability and support to the stack of bricks or blocks, helping to prevent them from shifting or collapsing.


Email: [email protected]

Whatsapp: 0086-13951501635


Steel sheet strapping machine

Steel sheet strapping machinery
Steel sheet strapping machinery

A- Strapping Machine Scope of supply


Design, supply, erection and start-up of #1 FP-32 Automatic steel Strapping Machine for the ID  strapping of steel sheet packages:


#1 Steel trap dispenser.

#1 Steel strap accumulator.

#1 Automatic steel Strapping Head.

#1 Control System for the strapping head movement from up and down

#1 steel belt Fixed arc and relative sector.

#1 steel belt Fixed guide and components.

#1 Machine main frame.


#1 Complete electric equipment for the operation of the Automatic strapping machine.


#1 Complete hydraulic equipment for the operation of the Automatic strapping machine.


#1 Complete pneumatic equipment for the operation of the Automatic strapping machine.

EXW facilities + packing for ocean freight.

Complete documentation of the machine.

Other elements described in the offer.


For steel coil packing machine:


Economy automatic strapping machine with PP

An economy automatic strapping machine for PP strapping. Easy operation and simple maintenance.
It is suitable for strapping on automatic packing line. It can realize high speed strapping with cycle speed 27 straps/min.
This type of machine adopts advanced design technology. It has the characteristics of high precision, high strength, wear resistance and low noise.

[email protected]




The strapping machine is designed to perform the strapping of the steel coil in automatic mode,can be connected to packing line for steel coils for strapping. It is full-auto centering position and finished strapping with PET belt. It can being possible to perform movements using the control desk of the strapping machine.

Model FPTS-300
Line voltage 380V , 50Hz, 3phases
Control voltage 24V DC
Strap material PET belt
Strap thickness 0.55/0.60mm
Strap width 16mm
Strap tension 100-800N
Strapping capacity Approx. 15-20sec/radial
Strap feeding / receding Speed 2m/s
Tension speed 3-6 m/min
Compressed Air supply 6-10bar
Nominal flow 4600L/ min 6bar
Power consumption Approx. 3.5kW
Control Siemens PLC