Categories
PET STRAPPING MACHINE

Machines for alumnium coil strapping

  • Fully automatic strapping machine is a specialized piece of equipment that is used to secure coils with straps. The machine is designed to handle the vertical strapping of coils and can be equipped with different heads for different joint types and strap qualities. The machine is also capable of applying coil protectors and marking or labeling the coils as they pass through the strapping process. It is available in a single-head version for the application of one strap or a twin-head version for the simultaneous application of two straps. The machine utilizes a conveyor system to load and center the coils, and the strap is fed through a strap channel before being sealed by the head. Is there anything else I can help with?
  • The fully automatic strapping machine is capable of applying multiple straps to a single coil by moving the strapping frame with the head to preset positions. This allows the machine to apply multiple straps to a single coil in a precise and efficient manner. If the machine is equipped with a twin-head version, it can apply two straps simultaneously, which can further increase the efficiency of the strapping process. It’s worth noting that the specific details of the strapping process may vary depending on the specific model and configuration of the machine, as well as the type and size of the coils being strapped. Is there anything else you’d like to know about this type of machine?
  • Contact:
  • www.fhopepack.com
  • [email protected]
Categories
PET STRAPPING MACHINE

Strapping Machine for bricks & blocks

Different Strapping Machines for bricks & blocks applications.

There are mainly 2 different strappin methods for bricks and clocks stacking pallets from FHOPE packing team.

  • 1. Vertical strapping of stacked bricks and blocks

Vertical strapping is a method of reinforcing stacked bricks or blocks by using metal straps or bands that are applied vertically to the sides of the stack. The straps provide additional support and stability to the stack, helping to prevent it from collapsing or shifting.

To apply vertical strapping, the straps are typically placed around the sides of the stack at regular intervals, with the top and bottom straps being positioned close to the top and bottom of the stack. The straps are then tightened using a tensioning tool, such as a ratchet or torque wrench, to apply a uniform tension to the straps.

Vertical strapping is often used in the construction of retaining walls, chimneys, and other structures that require additional stability and support. It can be especially useful in situations where the bricks or blocks are stacked to a significant height, or where the stack is subjected to high loads or other external forces.

  • 2. Horizontal strapping of stacked bricks and blocks

Horizontal strapping of stacked bricks and blocks refers to the practice of securing a stack of bricks or blocks together with horizontal straps or bands. This is typically done to ensure that the bricks or blocks stay in place and do not shift or collapse. There are a few different ways to perform horizontal strapping:

Using metal straps: Metal straps are typically made of steel and can be bent to fit around the stack of bricks or blocks. They are then tightened using bolts or screws.

Using wire ties: Wire ties can be used to secure a stack of bricks or blocks together. These ties are made of wire and are tightened using a wire-tying tool.

Using adhesive: Some builders use adhesive to secure a stack of bricks or blocks together. This is typically done by applying a thin layer of adhesive between the bricks or blocks and then allowing it to dry.

Regardless of the method used, the goal of horizontal strapping is to provide additional stability and support to the stack of bricks or blocks, helping to prevent them from shifting or collapsing.

Contact:

Email: [email protected]

Whatsapp: 0086-13951501635

Categories
Uncategorized

Strapping for steel coil